®™ Welcome to Strike Force Hobbies New Official Website. Preferred by modelers worldwide dedicated customer service
OFFICIAL DISTRIBUTOR FOR NORTH AMERICA AND CANADA !
ORGANIZE YOUR HOBBY WORKBENCH WITH HOBBYZONE PRODUCTS SOLD HERE !
WE ARE OPEN FOR BUSINESS ! We thank you for your most valued support and Patronage.
ALL PRODUCT PRICES IN U.S.FUNDS
Use Zephyr Xtra as a starting point for your Digitrax LocoNet System, then add components.
Use Zephyr Xtra as an expansion set with Digitrax equipment you already have installed.
Add Radio or IR via LocoNet. Just plug in a UR90, UR91 or UR92 receiver and add IR and/or Radio throttles.
Existing DCS50s/Zephyrs are not upgradable to the new DCS51s/Zephyr Xtras. The DCS51 is a completely new board design with additional keys and additional functionality.
Cost effective entry level LocoNet Compatible system Simple intuitive controls for running trains.
Large speed control knob and direction switch with brake.
Full numeric key pad
Large easy to read LED display Easy 2 and 4 digit addressing.
Smooth speed control.
Run up to 20 addresses at the same time on your system.
Run up to 20 throttles at the same time on your system.
Use one or two smooth DC power packs as throttles to control DCC equipped locomotives.
Simple, cost effective way to add more throttles to your Zephyr Xtra set.
Makes it easy to share the fun of DCC with layout visitors and young operators.
Functions on locos controlled by Jump throttles remain active.
Use Address 00 to run one or more locos without DCC decoders
Two Digit Addressing is easy to use. (Address 01-127)
Four Digit Addressing-use the number painted on your engines as its address.
Booster outputs 13V DC for safe operation in N and HO scales.
Control for 30 functions (F0Fwd, F0Rev and F1-F28)
Function 2 is a special non-latching key that can be used to sound the horn for as long as the key is held down.
Constant brightness lighting. Headlights can be directional or independently controlled (depending on decoder).
Access to stationary decoder control for turnouts and other devices.
Control 999 stationary decoder addresses.
Universal consisting, Digitrax preferred method. ALL locos can be consisted, even analog locos.
Advanced consisting, allows only advanced consist capable mobile decoders.
Basic consisting, program decoders to run on same address.
Built in read/write programmer that can read and write all CVs.
Supports Paged programming (Digitrax preferred method). Also supports direct & register mode programming.
Operations mode programming can be used to program decoders on the layout.
Blast Mode Programming for Sound