The BenchVent BV200H-D A2 ducted hood mounted extraction cabinet is a general purpose workstation for light aerosol spray and airbrush use. It is designed to capture dust and eliminate fumes/vapours for a safer working environment that meets the CoSHH regulations.
The workstation hood also accommodates prototypes, models, ceramic parts, PCB’s etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded or sanded etc.
These cabinets are designed for studio / classroom / workshop cleanliness and for immediate operator protection whereby ‘large’ particulates (> 5 microns) are filtered out and ‘fine’ particulates (<5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct.
All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. For artwork applications, standard A2 drawing boards can be placed within the hood enclosure.
The boards fit at an angle for efficient over-spray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.
The particulate (intake) filter is a three stage graduated fibre filter with a high ‘dust’ holding capacity for long life. Filtration to approx. 5 micron particles. NB: Spray particulate sizes vary from 10 to 20 microns. The dual process of filtration and then extraction to atmosphere via flexi-duct, vastly reduces and/or eliminates operator exposures to potentially hazardous substances.
Providing adequate control to the health of employees, students, and the general public from dusts, powders, mists, fumes, and vapours is a fundamental requirement of all BenchVent units manufactured.
Please select UPS as shipping option in your cart exact cost will be invoiced to the customer. Approximate and or average cost of shipping this unit is $ $150.00 U.S. - $196.00 U.S. within North America. Cost may be higher as shipping is calculated based on zip code and weight, customer(s) will be advised of the exact cost.
Specifically Manufactured for North America 110V, 60Hz with North America electrical plug.
670x525x450 (wxhxd) [internal] 680x600x450 (wxhxd) [overall]
Steel construction finished in grey – fan/filter unit mounted onto hood enclosure – particulate filter – centrifugal blower – external rotor motor type, brushless, UL, VDE and CSA approved -sealed electrical wiring and switch, downstream of filter. Flexi-duct 2 metres x 100mm dia.
|Air Volume at Free Air||
|Ave. Air Velocity at Filter Face||
|Ave. Air Velocity at Hood Face||
|Fan Motor Spec||
230V, 50Hz, 105W, 115V 60 Hz 115W
Particle Filter: IFA3
|Noise Level LAeq dB(A)||